What to know
- At the coast, deeper is not always better. Fresh groundwater sits on top of salty water, and drilling too deep or pumping too hard can pull salt in.
- With Bonvic, drilling usually costs KES 6,500 to 7,200 per metre including casing, gravel packing, test pumping and a water analysis. Sandy sites may need mud rotary drilling, which we confirm after the survey.
- A water analysis is essential in Kilifi County: studies have found high chloride and bacteria in many boreholes and shallow wells.
- For jobs booked by 30 November 2026, the survey is KES 40,000 and drilling is KES 6,500 per metre with PVC casing or KES 6,700 with steel casing.
BLACK NOVEMBER 2026 OFFER
Hydrogeological survey KES 40,000. Drilling KES 6,500 per metre with PVC casing or KES 6,700 per metre with steel casing, for jobs booked by 30 November 2026.
See the offer and estimate your total or call 0727 666444.
From Mtwapa and Kilifi town up to Watamu, Malindi and Magarini, Kilifi County is growing fast. Hotels, villas, apartments, schools and farms all need reliable water, and the piped supply often cannot keep up through the dry months.
Drilling at the coast is different from drilling inland. This guide explains why water quality comes first, how depth and drilling method are chosen, what it costs and how to plan a borehole that stays sweet for years.
Borehole cost estimator for Kilifi and Malindi
Near the coast the right depth is often set by water quality, not by how deep the rig can go. Move the slider to the depth in your survey report, or to a range you want to budget for, and pick what the water is for.
Based on Bonvic air drilling rates of KES 6,500 to 7,200 per metre from 2026 client quotes. Your exact depth and price are confirmed in writing after the survey.
Why coastal boreholes are different
Much of the Kilifi coast sits on coral limestone and coastal sands. Rain soaks in quickly and forms a layer of fresh groundwater that floats on top of heavier seawater underground.
Research along the Kenyan coast has found saline intrusion at all the sites surveyed, with the boundary between fresh and salty water typically less than 50 metres below sea level about one to two kilometres from the shore. The same work noted that deeper small diameter boreholes often had the highest salinity (UPGro coastal groundwater study).
In practice this means the target near the coast is the fresh layer, not the deepest possible water. A good survey and careful test pumping protect you from drilling into salt.
Water quality in Kilifi County
A 2019 study of groundwater in Kilifi County found chloride and salinity above 250 mg/L in places, linked to saltwater intrusion, and high conductivity around Magarini. It also found E. coli in almost all the boreholes and shallow wells tested, so treatment was needed before drinking (Makokha, 2019).
That is why every Bonvic borehole includes a water analysis. Our guide to borehole water testing in Kenya explains what each result means and when treatment is needed.
- Salinity and chloride: decide whether the water suits drinking, livestock or irrigation.
- Bacteria: shallow coastal water is easily contaminated, so keep the borehole well away from septic tanks and pit latrines.
- pH and hardness: coral limestone often gives hard water that scales kettles, pipes and solar heaters.
How deep are boreholes in Kilifi and Malindi?
Depth depends on how far you are from the shore, the ground under your plot and how much water you need. Inland sites around Mariakani, Kaloleni and Ganze are usually a different picture from beachfront plots in Watamu or Malindi.
The hydrogeological survey gives the recommended drilling point and depth for your plot. Read how to read a hydrogeological survey report so you know what to check.
Drilling method: air or mud rotary
Air drilling is fast and clean in firm rock. Loose coastal sands can collapse as the hole is drilled, so some sites need mud rotary drilling, where a drilling fluid holds the hole open until the casing goes in.
We choose the method after the survey and explain why in your written quote. Either way, proper casing and a gravel pack keep sand out of your water; see PVC vs steel borehole casing.
What a borehole in Kilifi County costs
| Item | Typical cost with Bonvic | Notes |
|---|---|---|
| Hydrogeological survey | KES 50,000 (KES 40,000 if booked by 30 Nov 2026) | Drilling point, expected depth, report for the permit |
| Drilling per metre | KES 6,500 to 7,200 | Includes casing, gravel pack, test pumping and water analysis; method confirmed after the survey |
| Permits | Quoted separately | WRA authorisation, and county approvals where needed |
| Treatment | Depends on the water analysis | Some coastal water needs disinfection or desalination |
Your written quote follows the survey, so the depth range, method and full price are clear before the rig arrives. See also the hidden costs of borehole drilling in Kenya.
Pump gently to keep your water sweet
At the coast, how you pump matters as much as how you drill. Pumping harder than the borehole can supply lowers the fresh water layer and can draw salty water up from below.
Test pumping measures the safe yield, and your pump should be sized to it, not to the biggest pump on the market. Our pump sizing guide and test pumping guide explain how.
- Pump steadily into a storage tank rather than in big bursts.
- Fit a solar pump sized to the tested yield where possible; see solar borehole pumps.
- Retest salinity once or twice a year, especially at the end of the dry season. Our guide on how often to test borehole water sets out a schedule.
Permits you need
In Kenya you need authorisation from the Water Resources Authority (WRA) before drilling, supported by the hydrogeological survey report. We handle the paperwork with every client; see do you need permits to drill a borehole in Kenya.
Areas we cover in Kilifi County
We drill across the county, including Mtwapa, Kikambala, Kilifi town, Watamu, Gede, Malindi, Magarini, Mariakani, Kaloleni and Ganze. We also work in neighbouring counties; see our guides for Machakos and Kitui.
Drilling further south on the coast? See our Mombasa borehole guide with a salt risk checker.
Choosing a driller? Use our eight checks to find the best borehole drilling company in Kenya for your project, with 2026 prices and red flags to avoid.
Frequently asked questions
How much does it cost to drill a borehole in Kilifi or Malindi?
With Bonvic, drilling usually costs KES 6,500 to 7,200 per metre including casing, gravel packing, test pumping and a water analysis. The survey costs KES 50,000, or KES 40,000 for jobs booked by 30 November 2026. Your full quote follows the survey.
Why is borehole water salty at the coast?
Fresh groundwater at the coast floats on top of seawater underground. Drilling too deep or pumping too hard can draw that salty water into the borehole.
Is a deeper borehole better in Kilifi?
Not always. Research on the Kenyan coast found that deeper small boreholes often had the highest salinity. The survey sets the best depth for your plot.
Is borehole water in Malindi safe to drink?
Only after testing. Studies in Kilifi County found bacteria in many boreholes and shallow wells, so every borehole needs a lab analysis and often treatment before drinking.
Planning a borehole at the coast?
Tell us where your plot is and what the water is for. We will book the survey and send a written quote.
WhatsApp 0727 666 444Call 0797 000 555


